3D print the Yokohama Marine Tower
A free, printable 3D model of Yokohama Marine Tower in Yokohama with its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Yokohama Marine Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 106 m
- On a 160 mm print
- 28 mm
- Scale
- 1:3,750
106 m of the Yokohama Marine Tower, 28 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim lattice tower
The lattice shaft is the delicate part. Try Print friendly to keep thin members printable, or Full detail on a larger print, and slow the upper layers so the top cools properly.
- One piece with the ground
The Yokohama Marine Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Yokohama Marine Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Yokohama Marine Tower
Yokohama Marine Tower is a lattice tower in Naka Ward, Yokohama, Japan. It is 106 meters (348 feet) high, with an observation deck at 100 meters. The tower was inaugurated in 1961. It is billed as the world's tallest lighthouse, although that depends on which structures are counted as lighthouses. In clear conditions, visitors on the observation deck can see Mount Fuji.
The tower has been closed and restored more than once. On December 25, 2006, it shut temporarily, and Yokohama's city government took ownership in order to restore it. It reopened on May 23, 2009, ready for Yokohama's 150th anniversary celebrations. In April 2019 it closed a second time for more renovations, reopening on September 1, 2022.
As a lighthouse, the tower flashes once every twenty seconds, with the light alternating between red and green. At first the shaft was lit in green and red at night, while after the May 2009 reopening the lights are white. The tower also appears in popular culture, including Godzilla vs. Mothra and From Up On Poppy Hill.
About this model
The Yokohama Marine Tower is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
