A white 3D print of Nissan Stadium, a near-round bowl under a ribbed roof ring that is wide over the long sides, among the streets and buildings around it.

3D print Nissan Stadium (Yokohama)

A free, printable model of Nissan Stadium in Yokohama, a near-round bowl under a full roof ring with radial ribs, among the surrounding streets and buildings, generated from map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Nissan Stadium (Yokohama) model, North view North
  • Nissan Stadium (Yokohama) model, East view East
  • Nissan Stadium (Yokohama) model, South view South
  • Nissan Stadium (Yokohama) model, West view West
On a 160 mm print
12 mm
Scale
1:4,688

12 mm tall on a 160 mm print

Make this print opens the generator on a 750 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Ribs across the roof ring

    Broad radial fins run over the roof, few and heavy, with plain sheeting between them, and the ring is widest over the long sides. Full detail keeps each rib separate; Print friendly thins them for a small print.

  2. Piers and the deck edge

    Tall piers carry the roof rim above open concourse levels, and the bowl stands on a raised deck with stair terraces in front of it. Those piers and the rows of posts along the stairs are the first parts to blunt.

  3. One piece with the ground

    Nissan Stadium (Yokohama) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Nissan Stadium (Yokohama) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Nissan Stadium (Yokohama)

Nissan Stadium, formally the International Stadium Yokohama, is a multi-purpose ground in Japan, in Yokohama, Kanagawa Prefecture. It opened in March 1998 and is where Yokohama F. Marinos, a J1 League club, plays at home; with 72,327 seats no stadium in Japan seats more. The Nissan name is there for sponsorship reasons.

It held three group stage games at the 2002 FIFA World Cup, and that tournament's final, Germany against Brazil, was played there on June 30, 2002. Football at the 2020 Summer Olympics also used it as a venue, and so did the 2019 Rugby World Cup, which ended with its final here after the National Stadium originally chosen as host could not be built in time.

Music has been part of the program: the rock band B'z played its first show at the ground in 1999 and returned in 2002, 2008 and 2013, and X Japan played two nights in a row on August 14 and 15, 2010 before an estimated 140,000 people. The track and the field take arena seating for such shows. The ground has also been a venue for the Club World Cup since 2002, when the competition was still the Intercontinental Cup.

About this model

Nissan Stadium (Yokohama) is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print