A white 3D print of Max-Schmeling-Halle, a broad indoor arena set among surrounding streets and buildings.

3D print Max-Schmeling-Halle

A free, printable model of Max-Schmeling-Halle, with its arena building and surrounding streets and buildings near the Mauerpark, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Max-Schmeling-Halle model, North view North
  • Max-Schmeling-Halle model, East view East
  • Max-Schmeling-Halle model, South view South
  • Max-Schmeling-Halle model, West view West
On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Wide roof and low walls

    The arena's wide roof and low walls form a simple mass, but the roof edge is easy to lose at small sizes. Print friendly adapts fine edges; a larger print keeps the roofline straight.

  2. Entrance level detail

    Low entrance areas and the roof edge are the smallest details here. If the print is small, Print friendly adapts them; 0.12–0.16 mm layers keep the vertical faces clean.

  3. One piece with the ground

    Max-Schmeling-Halle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Max-Schmeling-Halle takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Max-Schmeling-Halle

The Max-Schmeling-Halle in Berlin is a multi-purpose arena named after the German boxer Max Schmeling. It stands at Falkplatz in Prenzlauer Berg, in the former border area of the city, near the Mauerpark, with the Friedrich-Ludwig-Jahn-Sportpark next door. With a capacity of 8,861 to 12,000 people, it ranks among Berlin's largest indoor sports venues.

The arena opened on December 14, 1996, with Max Schmeling present at the ceremony. It was planned as a boxing gym for the 2000 Summer Olympics, then rebuilt as a multi-function hall after the games went to Sydney. Boxing and team handball are its main uses, and it hosts Füchse Berlin HBC.

Concerts have also filled the hall: Madonna played four sold-out shows there in June 2001 during her Drowned World Tour, Westlife performed in May 2001, and Motörhead played their last concert at the arena on December 11, 2015, seventeen days before Lemmy died. The arena hosted the CEV Champions League Grand Final in 2019.

About this model

Max-Schmeling-Halle is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Same skyline

More landmarks in Berlin