3D print Rashid Stadium

9 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. Wide bowl, shallow stands

   The stadium is wide and low, so its stands print as a broad ring at the default size. A larger print helps the stands and the bowl read as separate rings.

2. Layers for the seating

   Use 0.12 to 0.16 mm layers, and print slowly, so the stepped seating does not blur into one smooth surface.

3. One piece with the ground

   Rashid Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

4. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

5. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Rashid Stadium takes the building color.

6. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.