3D print the Stadio Benito Stirpe
A free, printable model of the Stadio Benito Stirpe in Frosinone, with its low covered stands around an open pitch, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Stadio Benito Stirpe in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Lattice floodlight towers
The four open floodlight portals are the thinnest parts. Print friendly adapts them at small sizes; Full detail or a larger print keeps the lattice crisp.
- Seating rows and aisles
Raked rows and radial aisles read best at 0.12–0.16 mm layers. A larger print makes the terrace divisions easier to see.
- One piece with the ground
The Stadio Benito Stirpe is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Stadio Benito Stirpe takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Stadio Benito Stirpe
The Stadio Benito Stirpe is an entirely seated football stadium in Frosinone, in Italy's Lazio region. It is also known as Stadio Casaleno and carries the official name PSC Arena. Its design dates from the mid-1970s and it was constructed during the latter half of the 1980s, but it stayed unfinished for about thirty years. Frosinone Calcio completed it between 2015 and 2017 after winning a 90-year lease from the local council, replacing the old municipal stadium.
The ground holds 16,227 seats across five stands: the Main Stand, North Stand, East Stand, South Stand and the Away End in the south-west corner. Its capacity makes it the largest stadium in its province and the third largest in Lazio. It is named in memory of Benito Stirpe, an entrepreneur who chaired Frosinone Calcio in the 1960s and was the father of his successor at the club, Maurizio Stirpe. The project cost about €20 million, including roughly €15 million for the completion work.
About this model
The Stadio Benito Stirpe is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
