3D print Stadio Friuli
A free, printable model of the Stadio Friuli, a three-sided bowl under a low ring roof, with the streets and buildings of Udine around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Stadio Friuli in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long cantilevered roof
The model's three rebuilt sides carry one low, continuous roof with a thin leading edge and repeated radial ribs. Print friendly adapts the roof lip; a larger print or Full detail keeps the ribs crisp.
- Two seating banks
Two banks of seats wrap the bowl behind tall rear columns. A layer height of 0.12–0.16 mm keeps the concourse and aisle lines sharp.
- One piece with the ground
Stadio Friuli is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stadio Friuli takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Stadio Friuli
The Stadio Friuli, called Bluenergy Stadium for sponsorship reasons, is a football ground in Udine, Italy, where Serie A club Udinese plays. The all-seater stadium dates from 1976 and holds 25,144 spectators. It sits at Rizzi, about 4 km from the center of Udine. It has also hosted an international rugby match.
The ground replaced the Stadio Moretti and once held 41,652 spectators; reconstruction reduced the capacity to 25,144, at a cost of around €50 million. In 2013, the city granted Udinese a 99-year lease, and the club did not have to move any home games during the work.
Reconstruction removed the athletics track and three old stands, keeping only the west stand's arch. The other three sides were rebuilt nearer the pitch, and the new ground opened on January 17, 2016, when Udinese hosted Juventus. The stadium held three matches at the 1990 FIFA World Cup, and on May 3, 1992, Pope John Paul II led a mass there before 30,000 people.
About this model
Stadio Friuli is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
