3D print 1 Wall Street
A free, printable model of 1 Wall Street amid closely packed buildings of different heights, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 54 mm
- Scale
- 1:3,750
54 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Retain the facade grooves
Fine vertical grooves and closely spaced window rows cover the stepped towers. Choose a larger print with Full detail to keep these modeled features, and use a slicer layer height of 0.12–0.16 mm to define the small setback ledges.
- One piece with the ground
1 Wall Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 1 Wall Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 1 Wall Street
1 Wall Street is an Art Deco skyscraper in New York's Financial District, in Lower Manhattan. It fills a block bounded by Broadway, Wall Street, New Street, and Exchange Place. Ralph Thomas Walker designed the original building for Irving Trust, and construction ran from 1929 to 1931. That section has 50 stories. A southern annex followed between 1963 and 1965, designed by the successor to Walker's firm. Together, the two sections form a building with numerous small setbacks and a slender upper tower.
Limestone covers much of the facade, where inward curves and fluted bays create an effect resembling curtains. The original building has chamfered corners; its upper tower has fluted bays without windows. Inside, the Red Room lobby contains colored mosaics. Following its history as a bank headquarters, the building underwent a residential conversion between 2018 and 2023, creating 566 condominium apartments alongside commercial space. The original section's exterior received city landmark designation in 2001. The building also contributes to the Wall Street Historic District, which entered the National Register of Historic Places in 2007.
About this model
1 Wall Street is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
