3D print the Morgan Stanley Building
A free, printable model of the Morgan Stanley Building amid closely packed towers and streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 209 m
- On a 160 mm print
- 56 mm
- Scale
- 1:3,750
209 m of the Morgan Stanley Building, 56 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Keep the facade details
The tower has closely spaced facade lines and small details along its setbacks. Choose Print friendly for smaller prints, or use Full detail at a larger print size to retain every modeled feature.
- Define the sloping roof
The sloping roof has fine vertical lines above a stepped crown. A slicer layer height of 0.12–0.16 mm helps keep these upper details crisp.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Morgan Stanley Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Morgan Stanley Building
The Morgan Stanley Building, also known as 1585 Broadway, stands in Manhattan's Theater District at Times Square in New York City. Its site runs along Broadway's western side, between 47th and 48th Streets. The office tower has 42 stories and reaches a roof height of 209 m (685 ft). Gwathmey Siegel & Associates Architects worked with Emery Roth & Sons on the design, while David and Jean Solomon developed the property. The building became Morgan Stanley's headquarters in 1995.
A broad base steps inward toward the tower, whose upper exterior combines glass with aluminum panels. A glass roof caps the building, while large signs mark the lower levels. Shops occupy the Broadway frontage; office visitors enter from the two side streets through a connecting lobby. Solomon Equities began the speculative development in 1989, and the building was finished in 1990 with Proskauer Rose as its sole tenant. Following foreclosure in December 1991, banks took control and sold the property to Morgan Stanley in 1993. Renovations preceded the company's move.
About this model
The Morgan Stanley Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
