3D print 120 Wall Street
A free, printable model of 120 Wall Street and the Financial District blocks, streets and waterfront around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 120 Wall Street
Lower Manhattan's Financial District is home to 120 Wall Street, a skyscraper on the easternmost stretch of Wall Street, where the block also meets Pine Street and South Street. It was finished in 1930 and rises 34 floors to 122 m (399 ft). Ely Jacques Kahn of Buchman & Kahn was the architect.
Its outline is the classic wedding-cake profile of New York skyscrapers built after the 1916 Zoning Resolution. The tower steps back in tiers on three sides, with shallow setbacks rising from a large 16-story platform. At street level, red-granite panels surround commercial windows with wide panes, all within a five-story limestone base. The building holds 615,000 square feet (57,100 m²) of space.
In 1928 the American Sugar Company sold the site to Greenmal Holding Corporation. The building opened in March 1930, with the American Sugar Refining Company as its original anchor tenant, and it rests on a foundation of 51 caissons. For many years it was the only major high-rise on the downtown East River waterfront, until the construction boom after the 1970s. In 1992 it received a designation as the city's only Association Center, which reduces rents for not-for-profit organizations.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 37 mm | 1:3,750 |
| 200 mm | 46 mm | 1:3,000 |
| 256 mm | 58 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Many shallow setbacks
- The tower narrows in a stack of shallow steps toward the top. Full detail at a larger print size keeps each step distinct; a layer height of 0.12-0.16 mm helps the upper tiers stay crisp.
- One piece with the ground
- 120 Wall Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 120 Wall Street takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
120 Wall Street is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 120 Wall Street STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 120 Wall Street grows with the print: about 37 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
