3D print Otto H. Kahn House
A free, printable model of the Otto H. Kahn House, a four-story mansion with a roof railing, and the nearby buildings and street grid, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 30 m
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
30 m of Otto H. Kahn House, 10 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rooftop railing and dormers
A thin railing runs around the roof, with small dormers and chimneys behind it. Print friendly adapts these thin parts; Full detail keeps them and suits a larger print.
- Rusticated base and windows
The facade is covered in rows of narrow windows and horizontal stone joints. A layer height of 0.12–0.16 mm keeps this fine vertical detail crisp, and a bigger print keeps more of it.
- One piece with the ground
Otto H. Kahn House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Otto H. Kahn House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Otto H. Kahn House
At 1 East 91st Street, where it meets Fifth Avenue, stands the Otto H. Kahn House, a mansion in Carnegie Hill on Manhattan's Upper East Side. The architects were C. P. H. Gilbert and J. Armstrong Stenhouse, and they worked in the neo-Italian Renaissance style. Completed in 1918, it served as the Kahn family's town residence; Otto H. Kahn was a financier and philanthropist. The house sits where Fifth Avenue meets 91st Street, on the northeast corner, looking across to Central Park on the west side.
The mansion has four stories and a basement, with a rooftop dormer that protrudes, and it reaches about 100 feet (30 m) at the roof. Its design followed the Palazzo della Cancelleria in Rome, home of the Papal Chancellery. Most of the facade is limestone from St. Quentin in France, while Caen stone covers the lowest two stories. The first story is rusticated, with arched windows set between iron grilles, and two big archways with paneled wooden doors open onto 91st Street.
Andrew Carnegie bought the lot in 1898 to safeguard the value of his own mansion nearby, and he kept it until 1913, when Kahn purchased it. The house passed to the Convent of the Sacred Heart after Otto Kahn's death in 1934, and it became classrooms, a library and offices. It is a designated New York City landmark, and it is included in the National Register of Historic Places together with the Burden House.
About this model
Otto H. Kahn House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
