3D print 125 Greenwich Street
A free, printable model of the slender 125 Greenwich Street tower and the skyscrapers packed around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 125 Greenwich Street
A residential skyscraper, 125 Greenwich Street (also called 22 Thames Street) rises in Lower Manhattan's Financial District, in New York City. One World Trade Center is two blocks to its north. The tower replaced the Western Electric building that had stood on the site, and the demolished Deutsche Bank Building once stood directly across from it. Rafael Viñoly designed the tower, and the British duo March & White designed its interiors. It stands 278 m (912 ft) tall.
A 10-story telephone factory, completed for Western Electric in 1888–1889, first stood at the address. The American Stock Exchange bought it in the 1980s, and investors demolished it decades later to make way for the skyscraper. In September 2014 an announcement put the tower's planned height at 413 m (1,356 ft), and in 2017 the height was revised to 278 m (912 ft). The new building's foundation was finished in June 2016.
Rounded corners and curved floor-to-ceiling glass set the tower apart. Two shear walls shaped like I-beams run up through the slender tower and hold up the floors, which leaves the building nearly free of columns. The top three floors are given over to amenities, among them a fitness center, a lap pool, a spa, private dining rooms and entertainment space.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 75 mm | 1:3,750 |
| 200 mm | 93 mm | 1:3,000 |
| 256 mm | 120 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Very slender stepped shaft
- The tower is very slender, with narrower bands where its sections step in. Printing slowly with good cooling helps tall thin shapes, and layers of 0.12 to 0.16 mm keep the steps crisp.
- Rounded corners and window lines
- Rounded corners and fine window lines run up the shaft. A bigger print size keeps more of them, and Print friendly adapts thin parts to the print scale.
- One piece with the ground
- 125 Greenwich Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 125 Greenwich Street takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
125 Greenwich Street is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 125 Greenwich Street STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 125 Greenwich Street grows with the print: about 75 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
