3D print 23 Wall Street
A free, printable model of the building and the dense towers of the Financial District around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 26 m
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
26 m of 23 Wall Street, 8 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A low building among towers
This building sits low among much taller neighbors. Print at a larger size so the facade keeps its detail, and use Full detail with a fine nozzle for the cornice and window recesses.
- One piece with the ground
23 Wall Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 23 Wall Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 23 Wall Street
Known also as the J.P. Morgan Building, 23 Wall Street is an office building of four stories in Manhattan's Financial District, on the southeast corner where Wall Street meets Broad Street. Trowbridge & Livingston designed it in the neoclassical style, and it went up between 1913 and 1914 as the main office of J.P. Morgan & Co.
The facade combines ashlar masonry with pink Tennessee marble and reaches roughly 85 feet (26 m) from the street. Unlike the skyscrapers nearby, the building has just four stories above ground. Its plan is an irregular heptagon, with the main entrance on a chamfered corner. Banking took place in a room that filled almost all of the ground floor and had a domed, coffered ceiling.
The site was earlier occupied by the Drexel Building, the banking headquarters of Drexel, Morgan & Co. After the Wall Street bombing in 1920 damaged the new building, the firm declined to repair it. In 1957 it was joined to its neighbor at 15 Broad Street, and the two served the firm until 1988. It is a New York City landmark and appears in the National Register of Historic Places.
About this model
23 Wall Street is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
