3D print Trump International Hotel and Tower
A free, printable model of the Trump International Hotel and Tower, a slender ribbed high-rise beside a park and a traffic circle, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Trump International Hotel and Tower
This Manhattan high-rise has two addresses: 1 Central Park West and 15 Columbus Circle, in the Upper West Side neighborhood. Thomas E. Stanley designed it as an office building, and it was finished in 1970 for Gulf and Western Industries, whose headquarters it became. Back then it was the Gulf and Western Building. The tower reaches 178 m (583 ft) and has held 44 physical stories from the start.
Ideas for an office skyscraper here began in 1965, when Hyman R. and Irving J. Shapiro, both developers, wanted to replace a building of two or three stories. Their firm's two proposals fell through, and Realty Equities Corporation took charge in 1967. At first the facade was aluminum and marble, with a public plaza facing Broadway and Central Park West. The basement housed a movie theater and shops, and the top floor had a restaurant.
In the mid-1990s the building was turned into a hotel and residential tower by a venture of Galbreath Company, the General Electric Pension Fund and Donald Trump. Philip Johnson and Costas Kondylis designed the work, which gave the tower a glass facade. Residences opened in 1996 and hotel rooms in 1997. Hotel space occupies the lower part, with condominiums above.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 48 mm | 1:3,750 |
| 200 mm | 60 mm | 1:3,000 |
| 256 mm | 76 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Tall slim tower
- The tower is a tall, slim block with fine vertical ribs on its sides. Print friendly adapts the ribs to the print scale; Full detail keeps them, which suits a larger print. Layers of 0.12 to 0.16 mm keep them crisp.
- One piece with the ground
- Trump International Hotel and Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Trump International Hotel and Tower takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Trump International Hotel and Tower is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Trump International Hotel and Tower STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Trump International Hotel and Tower grows with the print: about 48 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
