3D print 3 East 57th Street
A free, printable model of 3 East 57th Street and the Midtown blocks around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
3 East 57th Street in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine facade details
The facade carries small window and trim details. Print friendly adapts them to the print scale; Full detail with a larger print and 0.12–0.16 mm layers keeps more of them crisp.
- One piece with the ground
3 East 57th Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 3 East 57th Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 3 East 57th Street
3 East 57th Street began as the L. P. Hollander Company Building. The nine-story commercial building stands in Midtown Manhattan on the north side of 57th Street, a short way east of Fifth Avenue. Shreve, Lamb & Harmon designed it in an early Art Deco style, and construction ran from 1929 to 1930.
Its facade was laid out in three vertical parts: a base two stories tall, a shaft of six stories and an attic. The base has been changed a great deal, while the rest keeps its original look, with spandrels of silver-colored metal, mullions of gray limestone and a frame of black granite. On completion, the Fifth Avenue Association gave the building an award of architectural merit.
A clothing retailer, the L. P. Hollander Company, chose in late 1929 to build a store on land that the Stuyvesant family owned. The store opened in September 1930, though the company used it for under two years. In the 1940s and 1950s a Stouffer's restaurant was among the tenants, and upper floors served as offices. The city made it a landmark in 2003.
About this model
3 East 57th Street is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





