3D print 40 Wall Street
A free, printable model of 40 Wall Street, with its stepped tower and pyramid roof, and the tall buildings crowded around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 283 m
- On a 160 mm print
- 76 mm
- Scale
- 1:3,750
283 m of 40 Wall Street, 76 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Spire on the pyramid roof
A small spire tops the pyramid roof. Print friendly adapts a thin tip like this to your print scale, and Full detail keeps it; use 0.12 to 0.16 mm layers and print slowly near the top.
- Setbacks among crowded neighbors
The tower steps back in several tiers and sits close to other tall buildings. A larger print keeps these narrow ledges and gaps easier to read.
- One piece with the ground
40 Wall Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 40 Wall Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 40 Wall Street
40 Wall Street is a 70-story skyscraper on Wall Street in the Financial District of Manhattan, New York City. It was built in 1929 and 1930 to serve as the Manhattan Company's headquarters, and it was formerly called the Bank of Manhattan Trust Building. H. Craig Severance was the lead architect, working with Yasuo Matsui as associate architect and Shreve & Lamb as consulting architects. New York City has designated it a landmark, and the National Register of Historic Places lists it too.
The lower section is faced in limestone, while the upper stories are clad in buff-colored brick and step back many times. The setbacks respond to the city's 1916 Zoning Resolution. The six-story base fills the whole L-shaped lot, the 7th through 35th stories form a U shape, and above the 35th story a smaller square tower continues to the 62nd story. A pyramid topped by a spire forms the crown of the building.
The Manhattan Company used the lower floors for a banking room of double height, a board room and a trading floor, and it kept vaults in two basements. The remaining floors were rented to tenants, and several floors held private clubs. An observation deck occupied the 69th and 70th floors. The building opened on May 26, 1930, after it and the Chrysler Building competed to be the world's tallest building. The Chrysler Building won, but 40 Wall Street held the title for one month after its completion.
About this model
40 Wall Street is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
