3D print 50 Hudson Yards
A free, printable model of 50 Hudson Yards and the cluster of tall towers, streets and small park around it in New York City, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 50 Hudson Yards
The 58-story office tower at 50 Hudson Yards rises 308 meters (1,011 ft) in the Hudson Yards area of Manhattan, New York City. It was built under the Hudson Yards Redevelopment Project, on the southwest corner where 34th Street meets 10th Avenue. It stands north of 30 Hudson Yards and next to 55 Hudson Yards, on the east side of Hudson Park and Boulevard. The tower opened on October 19, 2022, and its commercial space totals 270,000 m2 (2.9 million square feet).
Foster + Partners designed the building, and Tony Ingrao designed its interiors. The exterior is clad in glass and hand-carved Italian marble and takes the form of three stacked rectangles, each smaller than the one below. The ground-level lobby holds sculptures in painted steel, aluminum and fiberglass by the American artist Frank Stella. Norman Foster designed an elliptical staircase that wraps around Stella's interlocking star sculpture.
The tower took the place of a drive-through McDonald's that long sat on this corner. Its entrance faces the 34th Street–Hudson Yards subway station, on the 7 Subway Extension, and an underground tunnel links the building to that station and to The Shops & Restaurants at Hudson Yards. Foundation work began in May 2018.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 84 mm | 1:3,750 |
| 200 mm | 105 mm | 1:3,000 |
| 256 mm | 134 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A very tall, slim tower
- The tower is tall for its footprint and stands among other tall towers. A slower print speed with good cooling helps the top stay crisp, and layers of 0.12 to 0.16 mm keep the steps in the shape sharp.
- A fine window grid
- The facade is covered by a fine grid of window frames. Print friendly adapts it to the print scale, while Full detail keeps every frame, which suits a larger print or a fine nozzle.
- One piece with the ground
- 50 Hudson Yards is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 50 Hudson Yards takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
50 Hudson Yards is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 50 Hudson Yards STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 50 Hudson Yards grows with the print: about 84 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
