3D print 888 7th Avenue
A free, printable model of 888 Seventh Avenue, a tall slab tower with a notched corner and rows of windows, and the dense Midtown skyscrapers around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 888 7th Avenue
888 Seventh Avenue is a 191-meter (628 ft) office skyscraper in the modern style, in Midtown Manhattan. It was completed in 1969, has 46 floors, and was designed by Emery Roth & Sons. Seen from above, it forms an L, with one wing running north to 57th Street and the other east to Seventh Avenue, wrapped around the neighboring Rodin Studios.
The building was formerly called the Arlen Building, after Arlen Realty & Development Corporation, the company behind its construction. A restaurant, the Red Eye Grill, sits at street level. In 2006, the lobby, elevators and plaza were renovated by Moed de Armas, who gave them white marble cladding, and the HVAC system also got an extensive overhaul. The building later earned LEED (Leadership in Energy and Environmental Design) gold certification. It has its own ZIP Code, 10106.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 52 mm | 1:3,750 |
| 200 mm | 64 mm | 1:3,000 |
| 256 mm | 82 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Notch in the tower
- The L-shaped plan leaves a notch in the tower. Layers of 0.12–0.16 mm keep the inside corner crisp, and a larger print size keeps it from filling in.
- Rows of windows
- Fine horizontal window rows climb the whole height. Use Full detail with a fine nozzle to keep them, and print slowly with good cooling for the tall shaft.
- One piece with the ground
- 888 7th Avenue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 888 7th Avenue takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
888 7th Avenue is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an 888 7th Avenue STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 888 7th Avenue grows with the print: about 52 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
