3D print Alice Tully Hall
A free, printable model of Alice Tully Hall and the Lincoln Center buildings, wide avenue and tall blocks around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A cantilevered overhang to watch
The renders show a large wing projecting out over the plaza on one side. Print larger and check the overhang in your slicer preview; a layer height of 0.12–0.16 mm keeps the edge clean.
- One piece with the ground
Alice Tully Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Alice Tully Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Alice Tully Hall
Alice Tully Hall, a concert hall at Lincoln Center on Manhattan's Upper West Side, is named for Alice Tully, a performer and philanthropist from New York whose donations helped pay for it. The Irene Diamond Building, designed by the architect Pietro Belluschi in a Brutalist style, contains the hall. It was completed and opened in 1969 and seats 1,086. Chamber Music Society of Lincoln Center is based at the hall, and it has hosted the New York Film Festival.
On Broadway's west side, between 65th and 66th Streets, and facing David Geffen Hall across the street, the building has a rhomboidal site because Broadway runs diagonally through the Manhattan grid. The original entrance was tucked under a second-story terrace and footbridge. It became fully visible only when the terrace, staircase and footbridge were removed in 2006.
Diller Scofidio + Renfro and FXFOWLE carried out a major renovation and expansion, completed in 2009. The work belonged to Lincoln Center's 65th Street Development Project. It brought new interior materials, along with technology and updated equipment for performances in music, film, theater and dance. A glass lobby three stories high and a sunken plaza lie under a new cantilevered extension. The architects aligned the Juilliard building with the grid and used the leftover triangle as a small plaza.
About this model
Alice Tully Hall is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
