3D print the Ambassador Theatre, Broadway
A free, printable model of the Ambassador Theatre and the tall buildings around its small Midtown site, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ambassador Theatre, Broadway in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small block among towers
The theater is a plain, low block hemmed in by much taller neighbors, so its details are small. A larger print keeps its small details readable; Print friendly simplifies the finest parts.
- One piece with the ground
The Ambassador Theatre, Broadway is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ambassador Theatre, Broadway takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Ambassador Theatre, Broadway
On West 49th Street (number 219) in Midtown Manhattan's Theater District stands the Ambassador Theatre, a Broadway venue. Herbert J. Krapp designed it, and it was built for the Shubert brothers in 1921. Its seating is on two levels, and The Shubert Organization runs the venue. New York City has designated its auditorium interior a landmark.
The theater is set on a diagonal axis, which squeezes more seats onto a small lot of 30 by 30 m (100 by 100 feet). Its facade is simple and mostly golden brick; the standout feature is a rounded entrance on the southeast corner, facing Broadway. Inside, the auditorium has detailing in the Adam style, a big balcony, and box seats under decorated arches, along with a segmental proscenium arch crowned by a curved sounding board.
After World War I, the Shuberts developed the Ambassador alongside the O'Neill and Walter Kerr theaters next door, as one complex near 48th and 49th Streets. Opening night, February 11, 1921, featured the musical The Rose Girl. In 1935 the Shuberts sold the property; it was used intermittently as a CBS broadcast studio and a movie theater, and in the early 1950s as a DuMont Television Network studio. In 1956 the Shuberts became owners again.
About this model
The Ambassador Theatre, Broadway is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





