3D print the Bayard–Condict Building
A free, printable model of the Bayard–Condict Building, a tall block with a decorated crown, among the dense low and mid-rise buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 49 m
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
49 m of the Bayard–Condict Building, 14 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ornate crown
Decorative arches and ornament line the top of the facade. Print friendly simplifies them at small sizes; Full detail keeps them on a larger print, ideally with 0.12 to 0.16 mm layers.
- Grid of small windows
The sides are covered with rows of small windows. A larger print size keeps more of them distinct.
- One piece with the ground
The Bayard–Condict Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Bayard–Condict Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Bayard–Condict Building
The Bayard–Condict Building is a commercial structure in Manhattan's NoHo area, at 65 Bleecker Street. Construction ran from 1897 to 1899, in the Chicago School style. Of all the buildings in New York City, it is the sole one by Louis Sullivan, who collaborated with Lyndon P. Smith. It is also known as the Condict Building and the Bayard Building. The city designated it a landmark in 1975, and it became a National Historic Landmark in 1976.
Its terracotta facade is divided horizontally into three parts: a decorated base, a shaft of identical floors stacked up, and an ornamented crown, a layout that illustrates Sullivan's views on skyscraper design. Piers split the upper stories into five bays, and six winged angels sit just beneath the cornice. Among the city's first skeleton-frame skyscrapers, it drew repeated objections from the Department of Buildings before the plans were finally accepted.
The United Loan and Investment Company developed it and named it for the Bayard family. Disputes over construction methods forced the company to give it up before completion, and Emmeline G. H. Condict owned it by June 1899. New storefronts replaced the old ones in the 1960s, the lobby followed in the 1980s, and the facade was restored in the late 1990s and early 2000s.
About this model
The Bayard–Condict Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
