3D print Central Hall, Sea Cliff
A free, printable model of Central Hall, a two-story building with a low gable roof, and the streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Shutters and porch detail
Rows of shutters and a railed porch run along the front. Print friendly adapts these small parts to the print scale; a bigger print and Full detail keep more of them.
- One piece with the ground
Central Hall, Sea Cliff is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Central Hall, Sea Cliff takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Central Hall, Sea Cliff
Central Hall, a historic commercial building, stands in Sea Cliff, Nassau County, New York. Dating to 1894, it has two stories, clapboard siding and a low gable roof. The building began as a dry goods store and also served the community as a meeting hall.
Central Hall earned a National Register of Historic Places listing in 1988. A study of the Sea Cliff Summer Resort area included the structure as a "Thematic Group". Its two original uses, shop and meeting hall, tied it to both commerce and community life in Sea Cliff.
About this model
Central Hall, Sea Cliff is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
