3D print the Conference House
A free, printable model of Conference House, a stone house with tall chimneys standing alone in parkland, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall chimneys
The roof carries several slender chimneys. Print friendly adapts these thin parts to the print scale; Full detail keeps them on larger prints, and printing slowly helps them stay clean.
- Very small footprint
The house is a single small building on open ground, so it prints small on its own. A larger print size and a layer height of 0.12 to 0.16 mm keep its windows and roof texture crisp.
- One piece with the ground
The Conference House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Conference House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Conference House
Billop House is another name for Conference House, a stone house in Tottenville on Staten Island. Captain Christopher Billopp built it some time before 1680. The house sits in Conference House Park, close to Ward's Point, which is New York state's southernmost tip. In the 18th century the spot went by the name "Billop's Point". The house overlooks Raritan Bay and holds both national and New York City landmark status.
Nobody can say exactly when the manor house went up, but a surviving map shows a building on the site before 1680. Billopp had come to America in 1674 after years of service in the Royal Navy, and he received a land patent covering Staten Island's southernmost tip. In the American Revolution, Christopher Billop became a colonel and led Loyalist forces opposing the colonists.
The Staten Island Peace Conference of September 11, 1776, hosted at the house by Colonel Christopher Billop, tried and failed to negotiate an early end to the American Revolutionary War. Lord Howe, who led British forces in America, met representatives of the Continental Congress. They were Edward Rutledge, Benjamin Franklin and John Adams, who had rowed across from Perth Amboy, New Jersey. After three hours the Americans declined his offer.
About this model
The Conference House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
