3D print Congregation Kol Israel
A free, printable model of Congregation Kol Israel and the neighboring buildings and subway cut beside it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rows of arched windows
The long walls carry many narrow arched windows and a roof skylight. Full detail keeps them at larger sizes; Print friendly merges the smallest ones. A thin layer height of 0.12-0.16 mm keeps the arches crisp.
- One piece with the ground
Congregation Kol Israel is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Congregation Kol Israel takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Congregation Kol Israel
Congregation Kol Israel is a Modern Orthodox Jewish synagogue at 603 St. John's Place, within Crown Heights, Brooklyn. It was founded as an Orthodox congregation in 1924, and its building went up in 1928. In 2009 the synagogue building joined the National Register of Historic Places.
The building is a vernacular "tenement synagogue": a small two-story rectangle faced in fieldstone laid at random. Tobias Goldstone, a Brooklyn architect, designed it. Its western side overlooks an open stretch of the Franklin Avenue Line, a New York City subway route, which runs in a cut beside the midblock lot.
About this model
Congregation Kol Israel is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
