3D print the COSCO Tower
A free, printable model of the COSCO Tower in the Grand Millennium Plaza, Hong Kong, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 228 m
- On a 160 mm print
- 67 mm
- Scale
- 1:3,750
228 m of the COSCO Tower, 67 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall office block
A tall office block prints best at a larger size, or with Full detail, so repeated facade details stay crisp.
- Slow the upper floors
Keep layers at 0.12 to 0.16 mm and print slowly so the straight edges of the shaft stay clean.
- One piece with the ground
The COSCO Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The COSCO Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the COSCO Tower
COSCO Tower is an office building in the Grand Millennium Plaza on the western side of Hong Kong Island. Its structural height is 228 m (748 ft). The Land Development Corporation developed the tower, and construction was finished in 1998. The tower stands in the Sheung Wan area of the city.
Of its 56 floors, 53 are above ground. Tenants include COSCO, COSCO Shipping International and the Urban Renewal Authority. China Ocean Shipping Co., Ltd. owns the building, which stands in the Grand Millennium Plaza. The tower is an office building within the Grand Millennium Plaza.
About this model
The COSCO Tower is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
