3D print the Cunard Building
A free, printable model of the Cunard Building, a tall stepped office block among dense Lower Manhattan towers, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 22 mm
- Scale
- 1:3,750
22 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stepped setbacks
The upper floors step back in several tiers, with small rooftop volumes on top. A layer height of 0.12–0.16 mm keeps those edges crisp, and a larger print keeps the smaller steps.
- Dense, tall surroundings
Taller neighbors crowd the building on several sides, so the model is mostly seen from above. Print friendly adapts the finest facade lines; Full detail keeps them and suits a bigger print.
- One piece with the ground
The Cunard Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Cunard Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Cunard Building
Standing at 25 Broadway in Lower Manhattan's Financial District, opposite Bowling Green Park, the Cunard Building has 22 stories of offices. Benjamin Wistar Morris designed it in the Italian Renaissance style, with Carrère & Hastings as consultants. It was built for the New York office of the British steamship operator Cunard Line, and construction began in 1920 and ended the next year. Frontage runs 76 m (248 ft) on Morris Street, 70 m (231 ft) on Greenwich Street and 62 m (203 ft) on Broadway.
The limestone facade facing Broadway has three horizontal sections, with setbacks and open light courts as the 1916 Zoning Resolution required. The building is H-shaped. It was laid out around an irregular street grid, right on top of a subway line that cuts diagonally across the site, and none of its corners is a right angle. The first floor holds an elaborately decorated lobby and a Great Hall that extends 56 m (185 ft) under a dome 20 m (65 ft) tall.
A Cunard Line affiliate, the Twenty-five Broadway Corporation, owned the building until the 1960s. Cunard left in 1968; from 1974 to 2000 the Great Hall was occupied by the United States Postal Service, and in 2014 Cipriani S.A. began using the hall. The facade and principal first-floor interiors are designated landmarks of New York City, and the building contributes to the Wall Street Historic District, which the National Register of Historic Places established in 2007.
About this model
The Cunard Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
