3D print Grace Church
A free, printable model of Grace Church with its tall spire and the dense Manhattan blocks around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 19 mm
- Scale
- 1:3,750
19 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall, slender spire
The spire is the thinnest part of this model. A smaller print may soften its tip; Print friendly adapts it, while a larger print and a layer height of 0.12–0.16 mm keep it crisp. Print slowly near the top.
- Pinnacles around the roofline
Small pinnacles and gables crowd the roofline. Full detail keeps them all and suits a large print or fine nozzle; Print friendly is the safer choice at small sizes.
- One piece with the ground
Grace Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Grace Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Grace Church
Grace Church is a parish church that belongs to the Episcopal Diocese of New York. It stands at 800–804 Broadway, on the corner of East 10th Street in Manhattan. Broadway curves toward the south-southwest here, which lines the church up with the avenues of the city grid. Its school and the church houses lie east of the church, at 86–98 Fourth Avenue, running from East 10th to East 12th Street.
The congregation was first organized in 1808, at the corner of Broadway and Rector Street. Thomas House Taylor became rector in 1834, and it was decided to move uptown as the city's population expanded. The land was bought from Henry Brevoort in 1843, and his nephew James Renwick Jr., then an architect aged 25, was commissioned. The cornerstone went in during 1843, and consecration followed in 1846.
The French Gothic Revival building is made of Sing Sing marble, and workers from Sing Sing state prison cut the stone. A wooden spire first crowned the church; a marble spire designed by Renwick replaced it in 1881. The church is a National Historic Landmark. The whole complex is also a New York City landmark, with the church and rectory designated in 1966 and the church houses in 1977.
About this model
Grace Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
