3D print Hamilton Grange National Memorial
A free, printable model of Hamilton Grange, with its porches and balustrades, on the grassy slope of its park, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Porches, posts and balustrades
Slender posts hold the porches, and rows of thin balusters run along the roofline and balconies. Print friendly adapts these thin parts to the print scale; Full detail keeps them, which suits a larger print with a 0.12–0.16 mm layer height.
- Chimneys and entry steps
The roof carries four small chimneys, and a double stair leads up to the entrance. These are small details, so a larger print helps them show.
- One piece with the ground
Hamilton Grange National Memorial is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hamilton Grange National Memorial takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Hamilton Grange National Memorial
Alexander Hamilton owned only one home, and it is Hamilton Grange National Memorial, also called Hamilton Grange or the Grange, a historic house museum set in St. Nicholas Park, within Hamilton Heights, in Manhattan. The National Park Service runs it. Exhibits fill the house, along with rooms restored to their 19th-century look.
Beginning in 1800, Hamilton bought land for the estate and hired John McComb Jr., an architect, to plan a country home. It was finished in 1802, two years prior to his death in 1804. Its first site was near today's 143rd Street. In 1889 it was moved to 287 Convent Avenue, and in 2008 it moved again, to St. Nicholas Park. Restoration and relocation closed the Grange from 2006 to 2011.
Federal in style, the house is a two-story frame structure with a ground-level basement. Its rectangular plan has porticos at the front and rear and piazzas on the left and right. The basement, which dates from 2011, holds the gift shop and exhibits. New York City has designated it a landmark; it is also a U.S. national memorial with a National Register of Historic Places listing.
About this model
Hamilton Grange National Memorial is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
