3D print Higashi Hongan-ji
A free, printable model of Higashi Hongan-ji in Kyoto, with its large hall under layered, curving roofs and the temple grounds and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)
The model you print
Higashi Hongan-ji in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 38 m
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
38 m of Higashi Hongan-ji, 10 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Layered curving roofs
The large roofs have fine tile rows and upswept corners, the most delicate part of the model. Use Full detail on a larger print to keep them, or Print friendly to adapt them to the print scale.
- Slim posts under the eaves
A row of thin columns holds up the lower eaves. Print slowly, and use a 0.12 mm layer height in the slicer so these vertical details stay crisp.
- One piece with the ground
Higashi Hongan-ji is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Higashi Hongan-ji takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Higashi Hongan-ji
Higashi Hongan-ji is the Kyoto headquarters temple of Jōdo Shinshū's Ōtani-ha branch, in Japan, and its name means Eastern Monastery of the Original Vow. The same name also covers one of the two leading sub-sects of Jōdo Shinshū, alongside Nishi Hongan-ji. In Kyoto the two complexes are called Ohigashisan, Honorable Mr. East, and Onissan, Honorable Mr. West. The present temple dates from 1895, built after a fire destroyed the previous one.
The shōgun Tokugawa Ieyasu established Higashi Hongan-ji in 1602 by splitting the sect in two, a division intended to lessen the sect's strength. The temple was first built at its present location in 1658. The Goei-dō, at the center, enshrines an image of Shinran. Few wooden structures anywhere are bigger: it measures 76 m (249 ft) long, 58 m (190 ft) wide and 38 m (125 ft) high. The Amida Hall beside it holds images of Amida and Prince Shōtoku and is ornately decorated with gold leaf.
Fire destroyed parts of the temple four times during the Edo period, including the Great Tenmei Fire of Kyoto in 1788, and the Tokugawa shogunate often helped pay for rebuilding. The temple began to rebuild in 1879, once the conflict that came with the Meiji Restoration of 1868 had eased. Both of those halls were finished in 1895, and the remaining buildings were restored by 1911. The mausoleum holding the ashes of Shinran, the founder of Jōdo Shinshū, has stood at its current site since 1670.
About this model
Higashi Hongan-ji is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





