3D print Hotel Gansevoort
A free, printable model of Hotel Gansevoort and the streets and neighboring buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Curved rooftop crown
The top of the tower has a curved roof with a rooftop terrace. Full detail keeps these shapes; a 0.12 mm layer height helps the curve print smoothly instead of stepping.
- One piece with the ground
Hotel Gansevoort is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hotel Gansevoort takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Hotel Gansevoort
Hotel Gansevoort is a luxury hotel on Ninth Avenue, number 18, in the Meatpacking District of Manhattan, New York City, located between 13th Street and Little West 12th Street. It was finished in 2004, and a renovation completed in 2021 left the property with 187 rooms and 23 suites, plus a rooftop pool and bar.
The hotel is described as the first urban resort developed in New York, and as the district's first luxury hotel. WSA Management Ltd., a company that develops and manages real estate, has the Gansevoort Hotel Group as a subsidiary.
About this model
Hotel Gansevoort is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
