3D print Hotel McAlpin
A free, printable model of Hotel McAlpin, a tall block with three wings, and the skyscrapers around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 120 m
- On a 160 mm print
- 30 mm
- Scale
- 1:3,750
120 m of Hotel McAlpin, 30 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall block with three wings
The building is a tall block with three wings and cornice details near the roof. Use 0.12-0.16 mm layers to keep the upper edges sharp, and a larger print for the facade grid.
- One piece with the ground
Hotel McAlpin is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hotel McAlpin takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Hotel McAlpin
Hotel McAlpin faces Herald Square along Broadway, between 33rd Street and 34th Street in Midtown Manhattan, and later became the residential condominium building Herald Towers. The Greeley Square Hotel Company built it from 1910 to 1912, and it served as a hotel for short stays until 1976. Frank Mills Andrews designed it in the Italian Renaissance style. At the time of its completion it ranked as the world's largest hotel, with 1,500 guestrooms.
The building rises 390 feet (120 m), with 25 stories above ground and four basement levels. Three wings face Broadway and Sixth Avenue, and the cladding is mostly brick, limestone and terracotta. Inside are 13,000 short tons of structural steel. The original lobby was triple-height and clad in marble and stone, and the basement held the Marine Grill, which could seat 250 people. In 1917 an annex with 200 rooms was added to the design of Warren and Wetmore.
The hotel changed names several times. It became the Sheraton-McAlpin in 1954 and the Sheraton-Atlantic Hotel in 1959, and in 1968 new owners restored the original name. It was converted to apartments in the late 1970s and reopened in 1980 under the name McAlpin House. In 1999 it took the name Herald Towers, and in the 2000s it became condominiums.
About this model
Hotel McAlpin is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
