3D print Mariners' Temple
A free, printable model of the church and the dense blocks of buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small building among tall ones
In the model this church is small beside the tall buildings around it. A larger print size keeps more of its small details, and Full detail suits a fine nozzle.
- One piece with the ground
Mariners' Temple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Mariners' Temple takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Mariners' Temple
Mariners' Temple, a Baptist church, has its address at 3 Henry Street, in Two Bridges, a section of Manhattan in New York City. Brownstone makes up the building, which has Ionic columns, and the church is affiliated with American Baptist Churches USA.
The congregation was established in 1795 as the Oliver Street Baptist Church, and the building was inaugurated in 1845. The church ordained Anders Wiberg in 1852 and John Alexis Edgren in 1866; both were early Swedish Baptist leaders. The facade is a New York City Landmark, and the building also has a National Register of Historic Places listing.
About this model
Mariners' Temple is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
