3D print the Mink Building
A free, printable model of the Mink Building, a large corner building with small gables along its roofline, set among taller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rows of small windows and gables
The tall brick walls have many small windows, and the roofline has little gables. Print larger with Full detail and 0.12 mm layers to keep the window rows crisp.
- One piece with the ground
The Mink Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mink Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Mink Building
Five stories of red brick in the German-American style make up the Mink Building. It stands on Amsterdam Avenue, numbers 1361-1369, between 126th and 128th Streets in Manhattanville. It began as part of a large brewery complex and is one of the few buildings left from the vast beer brewing industry that once stood in this area. The site was chosen because it was relatively isolated at the time. Louis Oberlein designed the complex, possibly with a partner, Anthony Pfuend. Most of the buildings use the American Round Arch style, then popular for industrial buildings.
Over the years the site housed a series of breweries, among them the D. G. Yuengling Brewing Co. from 1884 to 1897, John F. Betz from 1897 to 1901, and Bernheimer & Schwartz Pilsener Brewing Co. from 1903 to 1920, after which National Prohibition shut brewery operations down. In the Prohibition years several businesses took over the complex, including dairy, cold storage and laundry operations, and Horton's Pilsner Brewing Company used most of it in the 1930s.
In the 1940s the building became the Interborough Fur Storage Company, where wealthy New Yorkers kept their furs for the summer, and later it became offices, in the late 1990s. Only two brewery complexes survive on the island of Manhattan, and this malt house complex, with ethnic German architectural motifs, is considered the finest and the most complete.
About this model
The Mink Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
