3D print the Newark Legal Center
A free, printable model of the Newark Legal Center beside the river, with the buildings and roads around its base, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 28 mm
- Scale
- 1:3,750
28 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rounded columns and a stepped top
Two rounded corner columns run up the sides, and the crown steps back in tiers. Dense window grids are fine detail, so use 0.12 mm layers or Full detail on large prints.
- One piece with the ground
The Newark Legal Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Newark Legal Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Newark Legal Center
The Newark Legal Center, also called One Riverfront Center, is a New Jersey office building in the city of Newark. It stands beside the Passaic River, and a skywalk over Raymond Boulevard links it to Gateway Center and Penn Station.
The Port Authority of New York & New Jersey originally developed the building. The twenty-story tower holds condominium and rental office space aimed at the legal profession. Grad Associates is listed as its architect, and the year 2000 is given as its start.
About this model
The Newark Legal Center is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
