3D print Our Lady of Lebanon Maronite Cathedral, Brooklyn
A free, printable model of Our Lady of Lebanon Maronite Cathedral, a church with two towers, with the dense blocks of buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Two towers with small dormers
A tall square tower and a shorter tower with a steep roof and dormers stand beside the nave. Print friendly adapts thin parts to the print scale; Full detail keeps them on a larger print.
- Long roof between tall neighbors
The nave roof is a broad, plain slope. A layer height of 0.12–0.16 mm and a bigger print size help the tower windows and arches show.
- One piece with the ground
Our Lady of Lebanon Maronite Cathedral, Brooklyn is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Our Lady of Lebanon Maronite Cathedral, Brooklyn takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Our Lady of Lebanon Maronite Cathedral, Brooklyn
Our Lady of Lebanon is a Maronite Catholic cathedral in Brooklyn Heights, the borough's oldest northwestern section, facing Manhattan across the East River. The building began as the Church of the Pilgrims, a Congregational church. Father Mansour Stephen bought it for $70,000 on December 8, 1943, and its dedication took place on Sunday, November 26, 1944. The see city of the Maronite Eparchy of St. Maron-USA moved from Detroit to Brooklyn on June 27, 1977, and the church was named cathedral that same day.
Richard Upjohn, who was known for Episcopal churches in the Gothic Revival style, designed the Church of the Pilgrims in the Romanesque Revival style, at a cost of $65,000. Its cornerstone went down on December 22, 1844; the first service in the building came on May 12, 1846. A truss bridge was added after the timbers holding up the roof proved inadequate, and in the 1850s ten columns were added for extra roof support. An addition by Leopold Eidlitz, begun in 1869, added 450 seats.
The exterior doors were first used as dining hall doors on the French liner SS Normandie. They carry ten medallions, nine showing cities in Normandy and one showing the SS Ile de France, sister ship to the Normandie. Mahogany doors and marble pilasters inside the narthex came from the New York City mansion of Charles M. Schwab. The sanctuary's marble and onyx flooring came from the French pavilion and the Lebanese pavilion of the 1939 World's Fair in New York.
About this model
Our Lady of Lebanon Maronite Cathedral, Brooklyn is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
