3D print the Palazzo Corsini, Rome
A free, printable model of the Palazzo Corsini in the Trastevere section of Rome, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roofline and facade openings
A palace of this kind reads through its roofline and the openings along its facades. Use 0.12 to 0.16 mm layers and Print friendly on a small print; Full detail keeps the finest lines on a larger one.
- One piece with the ground
The Palazzo Corsini, Rome is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Palazzo Corsini, Rome takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Palazzo Corsini, Rome
In Rome's Trastevere section stands the Palazzo Corsini, a late-Baroque palace beside the Villa Farnesina. It was built for the Corsini family from 1730 to 1740 as an elaboration of the 15th-century Riario family villa that already stood there, following designs by Ferdinando Fuga. Between 1659 and 1689 the earlier palace hosted Christina, Queen of Sweden, and under her patronage the first meetings of the Accademia dell'Arcadia took place there.
In 1736 Cardinal Neri Maria Corsini, a nephew of Pope Clement XII, bought the villa and its land, then commissioned the present structure. During the Napoleonic occupation of Rome, Joseph Bonaparte stayed in the palace. The building holds offices of the Accademia dei Lincei plus the Galleria Corsini, an art museum on the first floor.
The gardens climb the Janiculum hill and form part of the botanical garden of the Sapienza University of Rome. Much of the gallery's collection came from the Corsini family, and in 1883 the state bought the palace and its contents; the collection spans mainly Italian art from the early Renaissance through the late 18th century.
About this model
The Palazzo Corsini, Rome is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
