3D print Philipse Manor Hall State Historic Site
A free, printable model of Philipse Manor Hall, with its roof balustrade and columned porches, on its lawn, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rooftop balustrade
A fine railing of many small balusters runs around the roof. Print friendly adapts thin parts like this to the print scale; Full detail keeps every baluster, which suits a larger print.
- Dormers, chimneys and porches
Small dormers, tall chimneys and columned porches break up the walls. A layer height of 0.12–0.16 mm keeps them crisp.
- One piece with the ground
Philipse Manor Hall State Historic Site is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Philipse Manor Hall State Historic Site takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Philipse Manor Hall State Historic Site
Philipse Manor Hall is a historic house museum in the Getty Square area of Yonkers, New York. Its address is Warburton Avenue at Dock Street, close to the Hudson River. It began as the Philipsburg Manor family's seat and later became Yonkers city hall. Only the Timothy Knapp House is older among Westchester County's standing buildings. The state's parks and historic preservation office owns and operates it.
Frederick Philipse, a Dutch-born merchant and first lord of Philipsburg Manor, built the oldest part, its southwest corner, around 1682, with his first wife Margaret Hardenbroeck, a prominent merchant herself. In his lifetime it was one of two manor houses, used as a stopover along the river. His grandson and great-grandson, Frederick Philipse II and III, enlarged it into the family's main residence. The Philipse family's slave-holdings were among the largest in the colonial North by the middle of the 18th century.
On November 28, 1776, Frederick Philipse III and over 200 others signed a declaration of allegiance to the British Crown. From 1868 to 1908 the building served Yonkers as its municipal center, first as Village Hall and then as City Hall. Since 1912, visitors have found it open as a museum covering history, art and architecture, and it became a National Historic Landmark in 1961. Inside is a ceiling of papier-mâché and plaster in the Rococo style, dated to around 1750.
About this model
Philipse Manor Hall State Historic Site is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
