3D print Santa Francesca Romana
A free, printable 3D model of Santa Francesca Romana and the surrounding streets and buildings of Rome, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Santa Francesca Romana in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Campanile and façade detail
A bell tower and a travertine façade are the finer parts to watch. Print friendly adapts thin parts to the print scale, and a layer height of 0.12–0.16 mm keeps vertical detail crisp.
- One piece with the ground
Santa Francesca Romana is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Santa Francesca Romana takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Santa Francesca Romana
Santa Francesca Romana is a Catholic church in Rome, Italy, next to the Roman Forum; its district is the rione Campitelli, and it was formerly called Santa Maria Nova. Pope Paul I is said to have founded an oratory here in the eighth century, inside the porch of what had been the Temple of Venus and Roma. By the tenth century a church stood here, named Santa Maria Nova to set it apart from Santa Maria Antiqua, another church in the Forum, which had fallen into ruin.
It grew larger during the later part of the tenth century. In the thirteenth century Pope Honorius III rebuilt it, adding the campanile and the apse and decorating it with a mosaic Maestà. The Olivetans have cared for it since 1352. It was rededicated in the 16th century to Frances of Rome, canonized in 1608, whose relics lie in the crypt. Carlo Lambardi designed and built the travertine porch and façade of 1615.
Inside, one nave flanked by side chapels was reworked from 1595 on, and the old schola cantorum in the nave is covered in Cosmatesque mosaics. The confessio below the altar dates from 1638 to 1649 and follows a design by Gian Lorenzo Bernini. The French took his central sculpture in 1798 and it is lost; Giosuè Meli made its replacement in 1866. Saint Frances is patron of car drivers, and on her feast day, March 9, cars line up as far as the Colosseum for a blessing.
About this model
Santa Francesca Romana is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
