3D print Santa Maria del Popolo
A free, printable model of Santa Maria del Popolo and the surrounding streets and buildings of Rome, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Santa Maria del Popolo in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Facade detail and print size
Print friendly adapts thin parts and small details to the print scale. A larger print or Full detail keeps more of the facade and roof detail, and a 0.12–0.16 mm layer height keeps it crisp.
- One piece with the ground
Santa Maria del Popolo is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Santa Maria del Popolo takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Santa Maria del Popolo
The titular church and minor basilica of Santa Maria del Popolo, run by the Augustinian order, stands in Rome. It sits at the northern edge of Piazza del Popolo, a square counted among the city's most famous, with the Pincian Hill on one side and Porta del Popolo on the other. This gate in the Aurelian Wall marks where Via Flaminia begins, the main route into the city from the north, which made it the first church for most travelers entering the city.
Works by famous artists fill the church, among them Raphael, Bernini and Caravaggio, as well as Donato Bramante, Pinturicchio, Andrea Bregno, Alessandro Algardi and Guillaume de Marcillat. A well-known legend of its foundation says that in 1099 Pope Paschal II led a procession of Rome's clergy and people to a haunted walnut tree, performed an exorcism there and struck the tree. He then set the foundation stone of an altar at the spot, and a simple chapel enclosing it was finished in three days.
The legend's factual basis is weak, though. The church was handed over to the Order of Saint Augustine around the midpoint of the 13th century, and the order has kept it ever since. Its early history is almost unknown, because the archives were dispersed during the Napoleonic era. The name del Popolo means "of the people", though its exact origin is debated.
About this model
Santa Maria del Popolo is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
