3D print St. James Roman Catholic Church
A free, printable model of St. James Roman Catholic Church, a small low building among towers and green lots, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small, low building
The church is low and small beside the towers around it. A larger print size or Full detail keeps more of its small details from washing out.
- One piece with the ground
St. James Roman Catholic Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. James Roman Catholic Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. James Roman Catholic Church
St. James' Roman Catholic Church stands at 32 James Street, in Lower Manhattan's Two Bridges neighborhood, between Madison Street and St. James Place. Only one other Roman Catholic building in the city is older. Fieldstone was used for the church, built in 1835–1837, and a pair of Doric columns flank the entrance. A domed cupola once topped the building.
The church is neo-classical and follows published designs by Minard Lefever, to whom it is sometimes attributed, although no hard evidence supports that. Bishop John Dubois created the parish to ease crowding at the Barclay Street church of St. Peter, and Father Félix Varela was asked to organize the congregation. The first Mass was celebrated in the basement on September 18, 1836.
Alfred E. Smith was an altar boy here while a student at its parochial school. City officials ordered the church closed in 1983 because its roof might collapse, and demolition was scheduled for 1986, but community efforts saved it, especially those of the Ancient Order of Hibernians, which formed its first branch at the church in 1836. It became a city landmark in 1966 and joined the National Register of Historic Places in 1972.
About this model
St. James Roman Catholic Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
