3D print the St. Nicholas Church, Brașov
A free, printable model of the church with its tall central spire ringed by turrets, and the crowded streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Nicholas Church, Brașov in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A spire ringed by turrets
A tall thin spire rises among several small turrets. Print slowly with good cooling, and use a 0.12–0.16 mm layer height so the spire and turrets keep sharp tips.
- Many small apses and chapels
The east end has several rounded apses, and chapels attach to the sides. Print friendly adapts these small details at small sizes; Full detail keeps them all on a larger print.
- One piece with the ground
The St. Nicholas Church, Brașov is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The St. Nicholas Church, Brașov takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the St. Nicholas Church, Brașov
In Brașov, St. Nicholas Church, a Romanian Orthodox church, dominates the historic Șcheii Brașovului district. Among Romania's oldest Orthodox churches, it is also an important cultural center for Romanians of Țara Bârsei. It is documented as rising where a wooden cross from 1292 once stood. A wooden church is first mentioned in 1399, and the stone church went up between 1495 and 1519.
Locals began rebuilding the church in stone in 1495, with help from Voivode Vlad Călugărul of Wallachia, and more help arrived around 1513 from Neagoe Basarab. Voivode Petru Cercel began the porch and choir in 1584, and Aron Vodă continued the work between 1595 and 1597, when the bell tower was built. The tower chapel followed in 1651. Empress Elizabeth of Russia gave 13,000 florins, and the clock tower rose in 1751.
The church is built of stone and brick, with a rectangular nave and a round apse at the eastern end. It was first built in the Gothic style and later redecorated with Baroque elements. Two towers stand at the front: a larger middle tower topped with four turrets and, over the entrance, a smaller tower with two turrets beside it. Inside, the muralist Mișu Popp and Constantin Lecca painted frescoes in 1849.
About this model
The St. Nicholas Church, Brașov is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





