3D print St. Teresa Church
A free, printable model of St. Teresa Church, a gabled church with a tall square tower squeezed between taller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower with pointed windows
The square tower carries pointed windows and a cross at the top. Print slowly with 0.12–0.16 mm layers, and choose a larger size or Full detail to keep the window outlines.
- One piece with the ground
St. Teresa Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Teresa Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Teresa Church
St. Teresa Church is a Roman Catholic parish church of the Archdiocese of New York. It stands at 16-18 Rutgers Street, where that street meets Henry Street, in Manhattan's Lower East Side. The building dates to 1841-42, built as Rutgers Presbyterian Church in the Gothic Revival style on land given by Colonel Henry Rutgers. St. Teresa's Parish took it over in 1863, three years after the parish was founded. The church is said to have New York City's oldest working public clock, wound by hand weekly.
AIA Guide to New York City calls it an ashlar church that follows the tradition of the other churches nearby, which predate 1850, and says services are held in English, Spanish and Chinese. In 1995 the vaulted ceiling inside collapsed, sending 60,000 pounds of plaster down through the floor and into the parish hall in the basement. The parish paid for a major renovation by selling its parking lot along with the air rights next to it. The work included a new roof, and three murals from the 1880s were restored. It reopened in early winter 2002, and Edward Cardinal Egan rededicated it in early 2003.
About this model
St. Teresa Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
