3D print Staten Island Borough Hall
A free, printable 3D model of Staten Island Borough Hall, with its clock tower and steep roofs, and the roads, small green spaces and larger buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Many small roof dormers
Rows of small dormers line the steep roofs. Print friendly adapts them to your print scale; Full detail keeps every one, better at a larger size.
- Clock tower and thin mast
The clock tower carries a slender mast on top. Printing slowly helps the tip, and a layer height of 0.12 to 0.16 mm keeps the tower's small details crisp.
- One piece with the ground
Staten Island Borough Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Staten Island Borough Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Staten Island Borough Hall
The main municipal building of Staten Island's borough government is Borough Hall, with an address of 10 Richmond Terrace, beside the Richmond County Courthouse and across from the Staten Island Ferry's St. George Terminal. It houses the Borough President's office, civic offices, and the departments for Buildings and for Transportation.
Carrere and Hastings designed the 1906 building in a French Renaissance style, in brick and limestone, following the 1898 consolidation of New York City. John Carrere, a Staten Island resident, helped choose the dramatic hilltop site. Inside are thirteen WPA murals illustrating Staten Island's history, painted by Frederick Charles Stahr, a local artist. New York City has landmarked the building, and the National Register of Historic Places listed it in 1983.
The main floor has thirteen arched niches made to showcase murals, each niche measuring 13 feet (4 m) in height and 6.5 feet (2 m) in width. No money for murals was available in 1906. Thirty years later Stahr, raised on Staten Island, applied for Works Progress Administration funding, and approval came in 1936. Over the next two years he painted storybook-style oil paintings on canvas, cemented to the walls as he went along. The subjects run from Verrazzano's 1524 discovery of the island to the Bayonne Bridge.
About this model
Staten Island Borough Hall is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
