3D print the Staten Island Light
A free, printable model of the Staten Island Range Light, a tall, slender lighthouse, and the grassy hill and houses around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall, thin tower
The tower tapers to a narrow top, so it is the most delicate part of the model. Print slowly with good cooling, and use a bigger print if you can.
- Lantern room and railings
A lantern room, a gallery with thin railings and a small mast crown the tower. Print friendly adapts these parts to the print scale; Full detail keeps them on a larger print.
- One piece with the ground
The Staten Island Light is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Staten Island Light takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Staten Island Light
Standing on Lighthouse Hill, also named Richmond Hill, on Staten Island, the Staten Island Range Light goes by a second name, the Ambrose Channel Range Light. The 90-foot tower dates from 1912. It is the rear range light paired with the West Bank Lighthouse, more than five miles to the northwest of it, and it stands 141 feet above sea level.
Its fixed white light is visible for 18 miles to vessels headed from the Atlantic Ocean for the port serving New York and New Jersey, but only when on range. The glass reflector and the original second magnitude Fresnel lens are in place. The station carries another light too, the Swash Channel Rear Light, a steady white beacon that shines around the clock.
New York City designated the light a Landmark in 1968, and the National Register of Historic Places listed it in 2005. It serves as a navigation aid for ships entering the Ambrose Channel, which lies in Lower New York Bay.
About this model
The Staten Island Light is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
