3D print the Summer Palace of Peter the Great
A free, printable 3D model of Peter the Great's Summer Palace in the Summer Garden, with the surrounding streets and buildings of Saint Petersburg, built from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low palace, fine roofline
This is a low, wide palace, so its facade and roof edges sit close to the ground and blur first. Print larger than the default or choose Full detail, and use 0.12–0.16 mm layers for the roofline.
- One piece with the ground
The Summer Palace of Peter the Great is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Summer Palace of Peter the Great takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Summer Palace of Peter the Great
Peter the Great's Summer Palace was built between 1710 and 1714 in Saint Petersburg, at the Summer Garden's northeast corner. The garden sits on an island between the Fontanka, the Moyka and the Swan Canal, and the palace's north side follows the left bank of the Neva, opposite Peter the Great's cabin and the Peter and Paul Fortress. It was the city's first palace.
Domenico Trezzini, a Swiss Italian architect, designed it as a stone building of two stories with a four-slope roof in the Petrine Baroque style. Next to other European palaces of the period it was modest, closer to the houses of Dutch burghers. Andreas Schlüter supplied 28 bas-reliefs for the exterior, depicting ancient myths and Russian victories in the Great Northern War, and a copper statue of St. George stands under the iron roof, whose corners are shaped like dragons.
Peter the Great used the palace as a summer residence with his second wife, Catherine I, and their children until his death in 1725. Later it served the imperial family and court officials, and in 1826 Carlo Rossi converted it into a Coffee House. The State Russian Museum has included the building since 2004, and its interiors were fully restored in the early 1960s; the museum shows the original oak staircase, the upper and lower kitchens and Catherine's apartments.
About this model
The Summer Palace of Peter the Great is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
