3D print the The Peninsula New York
A free, printable model of The Peninsula New York, an ornate older hotel with a detailed roof, tucked between much taller Midtown towers, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the The Peninsula New York
The Peninsula New York is a hotel where Fifth Avenue meets 55th Street, in Midtown Manhattan. Hiss and Weekes designed it, and it dates from 1905, when it was the Gotham Hotel. It belongs to the Peninsula Hotels group, owned by Hongkong and Shanghai Hotels. The limestone and granite facade was meant to harmonize with the University Club of New York next door, and it is divided into a base, a shaft and a capital. Despite its sturdy look, the facade is a curtain wall hung from the steel frame.
A series of triple-height piers of rusticated blocks forms an arcade along the three-story base, turning the corner from Fifth Avenue onto 55th Street. The main entrance, in the middle of the 55th Street side, sits under a segmentally arched broken pediment with sculptures of the ancient goddesses Ceres and Diana, and large Ionic columns flank the doorway. The building is shaped like a "C", wrapped around a light court that looks south toward the University Club.
The 55th Street Company bought the site in April 1902, and the Gotham Hotel opened on October 1, 1905. Several failed attempts to get a liquor license led to a sale in 1908, and it changed hands often afterward. After a renovation it reopened in November 1987 under the name Hotel Maxim's de Paris, and Hongkong and Shanghai Hotels took over its lease in 1989 and renamed it the Peninsula New York. In the 1980s a three-story glass penthouse by Stephen B. Jacobs was added above the original roof, and it holds the pool and fitness center.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 21 mm | 1:3,750 |
| 200 mm | 26 mm | 1:3,000 |
| 256 mm | 34 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Ornate roof and cornice
- The roofline carries detailed ornament. Layers of 0.12 to 0.16 mm keep it crisp, and Full detail suits a larger print.
- Between taller towers
- Taller buildings stand close around the hotel in the model. A larger print size keeps the narrow gaps readable.
- One piece with the ground
- The The Peninsula New York is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The The Peninsula New York takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The The Peninsula New York is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a The Peninsula New York STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The The Peninsula New York grows with the print: about 21 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
