3D print United States Post Office, Flatbush
A free, printable model of the Flatbush post office, a brick building under a gabled roof, with a long, low wing, among nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Gable roof and rear wing
The model is a gabled brick block joined to a long, low wing, with shallow window and brick detail. Print friendly adapts fine detail to the print scale; Full detail on a larger print keeps more.
- One piece with the ground
United States Post Office, Flatbush is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. United States Post Office, Flatbush takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About United States Post Office, Flatbush
The Flatbush Station post office is on Church Avenue, at number 2273, between Flatbush and Bedford Avenues, within Brooklyn's Flatbush neighborhood. It dates from 1936, and the consulting architect Lorimer Rich created the design. Its National Register of Historic Places listing came in 1988.
He designed it for the Treasury Department's Office of the Supervising Architect. Colonial Revival is the style of this symmetrical, two-story red brick building; it has a gable roof, and at the back is a large wing of one story.
About this model
United States Post Office, Flatbush is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
