Victor Emmanuel II Monument (Vittoriano) in 3D
The Victor Emmanuel II Monument (Vittoriano) appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Victor Emmanuel II Monument (Vittoriano) may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 70 m
- On a 160 mm print
- 25 mm
- Scale
- 1:3,750
70 m of the Victor Emmanuel II Monument (Vittoriano), 25 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Colonnade and rooftop statues
The long row of columns and the small statues on top of the two end towers are the finest details. Print friendly adapts them to the print scale; Full detail keeps them on a larger print.
- Wide stairways on the front
The broad stepped terraces have many fine horizontal lines. A 0.12-0.16 mm layer height keeps the steps crisp, and a bigger print size keeps them separate.
- One piece with the ground
The Victor Emmanuel II Monument (Vittoriano) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Victor Emmanuel II Monument (Vittoriano) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Victor Emmanuel II Monument (Vittoriano)
The Victor Emmanuel II National Monument, also called the Vittoriano or the Altare della Patria, is a large national monument in Rome, constructed from 1885 to 1935 as a tribute to Victor Emmanuel II, first monarch of a unified Italy. It sits between Piazza Venezia and the Capitoline Hill, and Giuseppe Sacconi designed it. The plan was a modern forum: an agora with three levels joined by stairways, topped by a portico with a long colonnade.
Its design reinterprets the Roman Forum in a neoclassical manner. Stairways, Corinthian columns and fountains are part of it, as is an equestrian statue of the king and a pair of statues showing the goddess Victoria on quadrigas. Two propylaea at the top flank the colonnade, one for the unity of the homeland and one for the freedom of the citizens. It opened in a partly finished state on June 4, 1911.
It spans 135 m (443 ft) in width and 130 m (427 ft) in depth, rising 70 m (230 ft); counting the quadrigae and Winged Victories, the height is 81 m (266 ft). The entrance stairway measures 41 m (135 ft) across, and the colonnade columns stand 15 m (49 ft) tall. Within it lies the Altar of the Fatherland, which also became a shrine for Italy's Unknown Soldier.
About this model
The Victor Emmanuel II Monument (Vittoriano) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





