3D print the Yavapai County Courthouse
A free, printable model of the Yavapai County Courthouse, a columned building with a triangular pediment, and the lawn, paths and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Yavapai County Courthouse
Prescott, Arizona, is home to the Yavapai County Courthouse, at 120 South Cortez Street. In 1912 Arizona became a state, and the county chose to build a new courthouse too. On February 16, 1916, the board of supervisors approved W. N. Bowman's building plans; he was from Denver, Colorado. The cornerstone was laid in October 1916, Italian stonemasons quarried the granite, and the Neoclassical Revival building was complete in September 1918.
The county's earlier courthouse was completed on February 23, 1878, and its public opening followed on September 3, 1878. It was a Victorian building with a basement, two stories of red brick and a clock tower holding a bell. George Waters of Maine built it, using sandstone from the Verde Valley for the lower story and local bricks above. Howard Watch Co of Boston, Massachusetts, supplied the clock and its 800-pound bell, which traveled by way of the Colorado River.
Buckey O'Neill, who was a Rough Rider and Prescott's former mayor, has a statue there, and it is one of the things the courthouse is known for. In 1964, Arizona's Senator Barry Goldwater declared his candidacy for president from the courthouse steps, and New York Mayor Fiorello La Guardia gave a speech there in 1938. Its listing in the National Register of Historic Places dates to 1977.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 6 mm | 1:3,750 |
| 200 mm | 8 mm | 1:3,000 |
| 256 mm | 10 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Slim columns and a pediment
- Slim columns line the entrance porch and the corners, under a triangular pediment, so print slowly with good cooling. Print friendly adapts them to the print scale; Full detail keeps them on a larger print.
- Stepped roof blocks
- The roof rises in stepped blocks with fine edges. A larger print size keeps them readable, and layers of 0.12 to 0.16 mm keep their edges crisp.
- One piece with the ground
- The Yavapai County Courthouse is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Yavapai County Courthouse takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Yavapai County Courthouse is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Yavapai County Courthouse STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Yavapai County Courthouse grows with the print: about 6 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
