3D print Yubileyny Sports Palace
A free, printable 3D model of Yubileyny Sports Palace in Saint Petersburg with its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Yubileyny Sports Palace in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide, low roof with pylons
The ring of evenly spaced pylons is a fine detail on a wide, low building. Print friendly adapts them to the print scale; Full detail keeps them on a larger print. Use 0.12–0.16 mm layers.
- One piece with the ground
Yubileyny Sports Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Yubileyny Sports Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Yubileyny Sports Palace
Yubileyny Sports Palace, an indoor arena and concert complex in St. Petersburg, Russia, is also rendered as Jubilee Palace of Sports. The Federation of Trade Unions gave it to the city as a gift, finishing it in 1967 to mark the 50th anniversary of Soviet power. A 2008 replacement of every seat in the Main Arena raised capacity to 7,012 spectators. The complex has four ice surfaces in total.
It was the USSR's first building with a cable-stayed roof. A 93-meter-wide span is held up without extra columns by a "bicycle wheel" design, in which steel cables run from an inner steel ring to an outer ring mounted on pylons. The design team won the USSR State Prize in 1971. The central building is circular, 94 m across and 22 m high, with evenly spaced pylons around a glass rotunda.
In 1970, from February 4 to 8, the arena was the venue for the European Championships in figure skating and ice dance. On November 1, 1997, it staged M-1: World Championship 1997, Russia's first major mixed martial arts event. The rotunda received bronze-tinted glazing ahead of the 2000 Ice Hockey World Championship. In May 2016 it held the 80th Ice Hockey World Championship, and it also stages large concerts.
About this model
Yubileyny Sports Palace is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
