3D print Ferencváros Stadion
A free, printable model of the Ferencváros Stadion, with its low roof ring and fine mesh facade, and the streets and buildings of Budapest around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ferencváros Stadion in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine mesh screen
The upper exterior is a fine horizontal mesh divided by tall seams, with structure behind it and an open entrance level below. Print friendly adapts the thin screen; Full detail keeps it on a larger print.
- Rounded roof ring
A low roof ring wraps the bowl around an open center. A layer height of 0.12–0.16 mm keeps the rounded eave and roof-edge lines clean.
- One piece with the ground
Ferencváros Stadion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ferencváros Stadion takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Ferencváros Stadion
The Ferencváros Stadion, sponsored as the Groupama Aréna, is a multi-purpose ground in Budapest's Ferencváros district, where Ferencvárosi TC plays. Its capacity is 22,000. Groupama's name cannot be used at FIFA and UEFA events, since those bodies bar non-partner sponsors. The club had played at its old ground since 1911.
The club's previous home, the Flórián Albert Stadium, was demolished in 2013. The old stadium was upgraded substantially between 1971 and 1974. For a period the new ground was the largest in Hungary, from the 2017 demolition of the bigger Ferenc Puskás Stadium until the Puskás Aréna opened in November 2019.
Groupama, a French insurance group, bought the naming rights. Construction of the new ground began on March 28, 2013, with 13.5 billion Ft as the projected cost, and took 14 months. Plans called for a 90-degree reorientation, with the pitch 10 cm below ground level. The UEFA Women's Champions League final of 2018–19 was played there on May 18, 2019.
About this model
Ferencváros Stadion is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
